I really like the ASRock coloring scheme of black, silver and gold - not only is it pleasant to look at, but the detail of also the capacitors gold means that with some good lighting, it would look nice in the window of a case. It&39;s a shame then the board seems to fill every nook and cranny with resistors and chips.
X79 Extreme9Price$235$360SizeATXATXPower Phase6+216+2Memory4 x DDR38 x DDR3PCIex16/x16/x8x8/x8/x8/x8/x8
The last board I reviewed, the ECS X79R-AX, while it didn&39;t have 8 DIMM slots, dual gigabit Ethernet or improved audio, came with the same 12 SATA ports, built in wireless and Bluetooth, and was up to $80 cheaper. The first X79 I tested, the ASUS P9X79 Pro, performed well, offers a range of extra features, has a first-rate BIOS and is $30 cheaper. The ASRock X79 Extreme9 has some serious competition when compared to these boards.
There are three n headers along the top - on the top right, a 3-pin power n header, and to the right of the 8-pin 12 V power connectors are two CPU n headers - one 4-pin and one 3-pin. The other n headers on board are in the bottom right of the board, where we find three chassiAnandTech motherboards headers (one 4-pin and two 3-pin). What we usually see on boards these days is another one by the 24-pin ATX power connector, but ASRock have filled the area around it with resistors and two USB 3.0 headers. The USB 3.0 headers are designed for front case USB 3.0 brackets, of which one is included with the X79 Extreme9.
As we don&39;t have direct onboard audio with the X79 Extreme9, this would perhaps give ASRock an opportunity to surprise us on the back panel. Nothing really special here though - a PS/2 Keyboard only port, six USB 2.0 ports, four USB 3.0 ports (blue), two eSATA 6 Gbpsmotherboard ports (red), a Clear CMOS button, a gigabit Ethernet port, and a Firewire/IEEE 1394 port. We&39;re not seeing many X79 boards with Firewire/IEEE 1394 of late, perhaps due to the prevalence of USB.
Power delivery has increased from a 6+2 to a 16+2 phase, we have the full complement of 8 DIMMs for X79 (two per channel), 5 PCIe (but still limited to 3-way SLI/CFX unless dual GPU cards are used), a dedicated audio processor, dual gigabit connections (which can be teamed) rather than a single, more SATA ports (8+4 rather than 5+4), and more USB (8+12 rather than 4+12). So in terms of functionality, we&39;ve got a lot of upgrades here for our extra 50%.
Would it be possible to report, for comparison, the time between the power button being pressed and the installed bootloader starting? I was thinking it might be easiest to measure this by having no OS on the boot media and measuring the time to the "please insert boot media" message, but I&39;m sure you can think of other ways of doing it.
If you want maximum performance per price, there&39;s no way you&39;d be looking at SB-E anyway.
byIan Cutresson 1/24/2012 2:00:00 AM
The PCH heatsink at the bottom is small, and unlike other non-ASRock X79 boards, comes with a small n attached. The beauty of this system is that the n will only rotate if the PCH goes above 50ºC. One of the criticisms is that ns like these make a lot of noise, especially when they are about to die - as this n will spin infrequently (most likely only during gaming when heat is being heavily produced inside a case), this isn&39;t really an issue here, at least in my perspective.
x16/-/x16/-/x8CrossfireX2x, 3x, 4x (Dual GPUs only)2x, 3x, 4x(Dual GPUs only)SLI2x, 3x, 4x (Dual GPUs only)2x, 3x, 4x(Dual GPUs only)AudioALC 898Creative Sound Core3DLANSingleDualSATA 6 Gbps58USB 3.048USB 2.01212XFast SoftwareYesYesDigital PWMYesYesDr. DebugYesYes
Visual Inspection
It&39;s hard to place the X79 Extreme9. I have reviewed the Extreme4 and Extreme4-M, both of which were good X79 budget boards for consumers or enthusiasts who wanted to jump into Sandy Bridge-E as cheaply as possible. The X79 Extreme9 comes in around +50% more than those boards ($360 vs. ~$240), meaning I would expect 50% more when it came to the Extreme9. And to a certain extent, we have obvious improvements:
Posted inMotherboards,X79,ASRockWhen you pay more for a product, you expect a better level of everything - performance, features, support. In a motherboard, I&39;d want all the upgrades - top line audio, overclockability, superior software, better USB 3.0 / SATA 6 Gbps controllers, and so on. The ASRock X79 Extreme9&39;s party piece is the bundled &39;Game Blaster&39; - a PCIe x1 card with Creative Sound Core3D Audio powered by a quad core audio processor and an additional Broadcom Gigabit LAN port. All in at $360 MSRP, today we review the Extreme9 to see if it fits into the enthusiast of enthusiast price segments.
AnandTech motherboard,Overview
Into the meat of the design, and the first thing to notice is the extended power delivery heatsink, connected from the top to the left hand side via a heatpipe. The heatsinks themselves are irly beefy afirs, with a modest attempt to balance brute mass of heat transferable material with suce area for cooling. This, combined with the 8 DIMM slots and dual 12V 8-pin connectors leaves little room in the CPU socket if all 8 DIMM slots are filled - if you only have four memory sticks, the recommended filling doesn&39;t include the ones nearest to the CPU, meaning a little extra memory for big air coolers.
The SATA ports are numerous down the right hand side - the first two in black are the SATA 3 Gbps from the PCH, followed by two SATA 6 Gbps from the PCH in dark grey. Below this are six SATA 6 Gbps ports powered by three controllers - two ports from one Marvell SE9220 controller, and four ports from two Marvell SE9172 controllers. It might seem odd to use two different controllers for these ports - one could assume that the 9172 is cheaper than the 9220, or there were implementation issues with three SE9220s, but the real reason is SSD caching. The SE9220 has a hardware based caching mechanism when an SSD+HDD are used. This is all enabled through software provided on disk. Next to the SATA ports, we find the power/reset button combo as well as a debug LED - useful for finding memory boot errors (among others)!
I remember jumping to X58 when I saw that a reasonably priced cpu (i7 920) which would OC like crazy came available. Not so much with X79, still waiting for i7 3820, all parts on hand, including an ASRock Extreme 7 ($259). It&39;s not such a bad platform when cheap mobo&39;s, cpus, and DDR3 are available. What about it Intel?? Stupid move IMO not getting 3820 to market sooner. X79 could have garnered more steam than it has..
What would be nice, in motherboard reviews, would be a measure of the cold boot (POST) time. This is something that different bioses can be differentiated on, and UFEI offers the potential for very st boots if manucturers take advantage of it properly.
"The X79 Extreme9 comes in around +50% more than those boards ($360 vs. ~$240), meaning I would expect 50% more when it came to the Extreme9."
should be fixed now :)thank you for the heads up! passed it along to our devmoved to a new host, will give everyone the info on where we ended up when the time is right - still working on migration now :)just as an option if users dont have good DNS to begin with :)hahahah leave my big nose alone!very funny :-P
It never works like this. Is a Ferrari 5000% better than a Ford? What about 3960x vs. 3930k?
For the record Creative&39;s Core3D doesn&39;t offload openal, in case anyone was expecting it too.
It would be interesting to compare this values between various manucturers.
However after testing, I wasn&39;t all that impressed. Performance is not at all noticeably different, and automatic overclocking wasn&39;t at all &39;better&39; for 24/7 use. On the positive, the manual overclocking was highly successful, and I was able to breeze through my regular suite of tests without a major hitch - no initial turbo or memory issues - which usually happens when testing a motherboard. Only when it came to overclocking and DDR3-2400 support did I feel let down in any way. But the competition comes from the cheaper boards, either ASRock or other - it all boils down to functionality.
I would absolutely love to see these figures also. It is a major annoyance to me that my ASUS motherboard takes a full 7 - 8 seconds to even show the POST screen, and a further 1 - 2 seconds after that to get to my bootloader. I would personally highly value a greatly reduced POST time and would like to have this information in motherboard reviews. Having these values measured, evaluated, and compared is the only way that motherboard and BIOS makers will have any incentive to improve.
The ASRock board has 5 full-length PCIe slots, which deult to either x16/-/x16/-/x8 or x8/x8/x8/x8/x8 depending on how they are filled. There is a solitary x1 port after the first two PCIe full length ports, designed for the ASRock Game Blaster card as shown in the stock image above. The Game Blaster lights up red when powered (which is obscured by any second GPU installed), and the audio outputs also light up when powered for their different functions, it easier to see if you have to fiddle in the dark behind a case.
Another commenter also requested that this be done for both stock and overclocked settings, as he found boot times to be much slower with overclocked settings on his motherboard.
I&39;m on the same boat! my asus z68 board takes longer to post than to load windows with a intel 510 ssd!
I mentioned this in the last motherboard review, but as I didn&39;t get an answer either way, I&39;ll ask again just in case:
.gif){kind=small}
Recent Comments